Epson Z8250NL, Z8455WUNL Interpreting Event IDs, 112, Event ID Cause Remedy, Security Menu p.77

Problem Solving 112

Interpreting Event IDs

Check the event ID and perform the remedy given below. If the problem cannot be solved, contact the network administrator or one of the following contact addresses. s p.114

Event ID	Cause	Remedy
0432	Failed to startup EasyMP Network Projection.	Restart the projector.
0435
0434	Network communication is unstable.	Check the status of network communications. Wait for a while and then try
0481		connecting again.
0482
0485
0433	An image that was transferred cannot be reproduced.	Restart EasyMP Network Projection.
0484	Communications was cut off from the computer.
04FE	EasyMP Network Projection ended unexpectedly.	Check the status of network communications. Restart the projector.
04FF	A system error occurred in the projector.	Restart the projector.
0891	The same SSID access point cannot be found.	Set the computer, the access point, and the projector to the same SSID.
0892	The WPA and WPA2 authentication methods are not the	Check the wireless LAN security setting to see if it is correct. s Network Menu -
	same.	Security Menu p.77
0893	The WEP, TKIP, and AES encoding methods are not the
	same.
0894	Communications was cut off because a connection was	Check with the network administrator and follow their instructions.
	made to the wrong access point.
0898	Failed to obtain the DHCP.	Check the DHCP server to see if it is operating correctly and check the LAN cable to
		see if it is connected correctly. Turn off DHCP if it is not being used. s Network
		Menu - Wireless LAN Menu p.74, Wired LAN Menu p.81
0899	Other connection errors	If the problem cannot be solved by restarting the projector or EasyMP Network
		Projection, contact one of the following contact addresses. s p.114