Toshiba P200 manual Keyboard, LCD panel, Hard disk drive

Troubleshooting

Keyboard

Keyboard problems can be caused by your setup configuration. For more information refer to Chapter 6, The Keyboard.

	Problem	Procedure
	Output to screen is	Make sure the software you are using is not
	garbled.	remapping the keyboard. Remapping involves
		reassigning the meaning of each key. See your
		software's documentation.
		If you are still unable to use the keyboard, consult
		your dealer.
LCD panel

	Problem	Procedure
	Lines appear broken.	Check if you are in DOS mode. In DOS, lines may
		appear broken, because of the LCD screen's
		higher resolution. The Windows display should
		appear normal.
	No display	Press the Hotkey Fn + F5 to change the display
		priority and ensure it is not set for an external
		monitor.
		Make sure instant security was not activated. Try
		entering your password, if you have one
		registered. Or, turn the power off and back on to
		clear instant security .
	Problems above remain	Refer to your software's documentation to
	unresolved or other	determine if the software is causing the difficulty.
	problems occur.	Contact your dealer if the problems continue.
Hard disk drive

Problem

Computer does not boot from hard drive.

Procedure

Insert a system disk and reboot.

There may be a problem with your operating system files. Refer to your operating system documentation.

Slow performance	Your files may be fragmented. Run SCANDISK
	and defragmenter to check the condition of your
	files and disk. Refer to your operating system
	documentation or online HELP for information on
	running SCANDISK and the defragmenter.
	Contact your dealer if the problems continue.

Satellite P200/Satellite Pro P200 10-7