Toshiba P200 manual Displaying movies on a Hdmi Monitor, Select CCC

Display Modes

Displaying movies on a HDMI Monitor

This section describes how to set up your system to display movies a HDMI monitor.

To connect a HDMI monitor, follow the steps below.

1.Turn the computer off.

2.Use a HDMI cable (not supplied) to connect the HDMI monitor to the HDMI out port on your computer.

3.Turn the HDMI monitor on.

4.Turn the computer on.

If a HDMI monitor is connected to the computer, follow the steps below, based on the configuration of your computer:

1.Click Start and All Programs.

2.Click Catalyst Control Center.

3.Select CCC.

4.In Catalyst Control Center window, select Display manager from left select panel.

5.You can see a HDMI monitor that connected in the list (If not, you can click Detect Monitor once)

6.Drag HDMI monitor icon to “Main:” then select Swap Devices.

7.After system applying the display mode to HDMI, click Force then select Desktop area to select the HDMI mode.

* The availability of this feature is dependent on the model you purchased.

B-6 Satellite P200/Satellite Pro P200