
4 Replacement Procedures | 4.17 Fingerprint Module |
4.17 Fingerprint Module
Removing the Fingerprint Module
To remove the Fingerprint Module, first remove the battery pack, keyboard, and top cover, and then follow the steps below:
1.Remove four M2.5x3 screws securing the Fingerprint Module Bracket to the rear side of the top cover.
Figure 4-49 Removing the fingerprint module bracket screws
2.Remove the bracket.
Figure 4-50 Removing the fingerprint module bracket
[CONFIDENTIAL]Satellite P200/ P205 Series Maintenance Manual |