4 Replacement Procedures

4.19 Subwoofer Unit and USB Board

Installing the Subwoofer Unit and USB Board

To install the subwoofer unit and USB board, follow the steps below and refer to the figures in the preceding section:

1.Place the USB board in position.

2.Connect the USB board cable to the system board.

3.Secure the USB board with one M2.5x4 screw.

4.Seat the subwoofer unit in place.

5.Connect the subwoofer cable to the system board.

6.Secure the subwoofer unit with four screws.

4-50

[CONFIDENTIAL]Satellite P200/ P205 Series Maintenance Manual

Page 172
Image 172
Toshiba P205 manual Installing the Subwoofer Unit and USB Board