4.11 Display Assembly | 4 Replacement Procedures |
Installing the Display Assembly
To install the display assembly, follow the steps below and refer to the figures in the preceding section.
1.Seat the display assembly, taking care not to crush to the LVDS cable or wireless LAN antenna connectors.
2.Secure two M2.5x8 black screws to each hinge to connect the assembly on the top cover.
3.Secure two M2.5x8 black screws to the computer’s rear side. They hold the display assembly in place.
4.Replace the strip cover.
5.Connect the LVDS cable, function button board cable, wireless LAN antennas, CMOS cable, and microphone cable to their respective sockets on the system board.
Satellite P200/ P205 Series Maintenance Manual[CONFIDENTIAL] |
