
4 Replacement Procedures | 4.23 VGA Board |
3.Remove the heat sink from the VGA board by removing the four screws. Follow the order indicated by the numbers on the heat sink in reverse to remove the screws.
Figure 4-69 Removing the VGA heat sink
Installing the VGA Board
To install the VGA board, follow the steps below and refer to the figure in the preceding section:
CAUTION: If you remove the heat sink, use the grease tool to remove the grease on the VGA board and heat sink. Reapply fresh grease before installing the heat sink.
1.Connect the heat sink to the VGA board by securing it with four screws. Follow the order indicated by the numbers on the heat sink to tighten the screws.
2.Seat the VGA board and secure it by placing the three M2.5x4 screws and tightening them.
[CONFIDENTIAL]Satellite P200/ P205 Series Maintenance Manual |