4 Replacement Procedures

4.6 Expansion Memory

Installing the Expansion Memory

CAUTION: Do not touch the connectors on the expansion memory module or on the computer. Debris on the connectors may cause memory access problems.

To install a memory module, follow these steps and refer to the figures in the preceding section.

1.Set the computer to boot mode and turn off the power.

2.Remove the black non-separate screw with RAM door M2.5x6.5 screw securing the memory module socket cover.

3.Slide your fingernail or a thin object under the cover and lift it off.

4.Fit the module's connectors into the computer's connectors at about a 45-degree angle and press the module carefully to ensure a firm connection.

5.Push the module down so it lies flat. The latches on either side will click into place to secure the module.

6.Seat the cover and secure its screw.

4-20

[CONFIDENTIAL]Satellite P200/ P205 Series Maintenance Manual

Page 142
Image 142
Toshiba P205 manual Installing the Expansion Memory