4 Replacement Procedures

4.25 Display Mask

2.Carefully insert your fingers between the display mask and the LCD panel, and pry open the snaps. Start with the four snaps at the top of the display mask. Continue unsnapping the display mask along the two sides and the bottom edge to remove the display mask.

Figure 4-77 Removing the display mask screws

Installing the Display Mask

To install the display mask, follow the steps below and refer to the figures in the preceding section.

1.Seat the display mask and secure the snaps on each side.

2.Secure the display mask with two silver M2.5x6 screws and two black M2.5x8 screws.

4-64

[CONFIDENTIAL]Satellite P200/ P205 Series Maintenance Manual

Page 186
Image 186
Toshiba P205 manual Replacement Procedures Display Mask, Installing the Display Mask