4.21 VGA PCB

4 Replacement Procedures

4.21 VGA PCB

Removing the VGA PCB

To remove the VGA PCB, first remove the battery pack, keyboard, display assembly, and top cover, then follow the steps below:

1.Disconnect the VGA PCB wire cable from the system board.

Figure 4-61 Removing the VGA PCB FFC cable

2.Remove the M2x6 screw securing the VGA PCB. Then remove the two hexagonal VGA screws from the left side of the computer.

Figure 4-62 Removing the VGA PCB screw and the hexagonal screws

Satellite P200/ P205 Series Maintenance Manual[CONFIDENTIAL]

4-53

Page 175
Image 175
Toshiba P205 manual Vga Pcb, VGA PCB Replacement Procedures, Removing the VGA PCB