Error! Style not defined. Error! Style not defined. | 4 Replacement Procedures |
2. Remove the HDD pack by pulling on the tab attached to the pack.
NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble or replace the HDD pack only if it fails.
3.Place the HDD pack on a flat surface such as a desk.
4.To separate the plate from the HDD, remove four M3x3 screws according to the number sequence sealed on the HDD plate.
1
M3×3*4
2
3
4
Figure 4.3 Removing the HDD plate
CAUTION: Do not apply pressure to the top or bottom of the drive.
Satellite L450/Pro L450/L450D/Pro L450D Maintenance Manual |
