Toshiba PROSEC T3H user manual Example, S20LP

2. Expanded Functions

Inside the parameter (cont’d):

Status	S20LP	Ethernet
Abn	0: Normal complete
	1: Error complete
Busy	0: Initial state
	1: Transmission port busy
Status	0: Initial state
	1: While send requesting
	2: While waiting response
	3: Complete
TermSTS	H00: Normal complete
	H01: Register designation error
	H02: Response time-out
	H03: Parameter error
	H04: Register write protect
	H05: (Reserve)
	H06: Module error (send time-out)
	H07: No send channel
	H08: Invalid station No.
	H09: Transfer size error
	H0A: Boundary error
	H0B: Transmission error	Bit 7 indicates the error is occurred
	H0C: I/O no answer error	whether self-station or target-station.
	H0D: IC card designation error	0: Self-station
	H0E: (Reserve)	1: Target-station
	H0F: (Reserve)
Transmission error	When TermSTS is H0B, the error information is stored. (0 for other cases)
information	For detailed information, refer to the S20LP or EN311 manual.

Example

RW010	2			1		3
RW011					0
RW012					128
RW013					3
RW014					100
RW015					4
RW016					1000
RW017					10
RW050
	0	0	1	0		0
RW051					0

S20LP, channel 1, target station No. is 3

Transfer size: 128 words

Self-station RW register

Leading address: RW100

Target-station D register

Leading address: D1000

Response time limit: 1 second

Send requesting

64 PROSEC T3H