Toshiba PROSEC T3H user manual S20LP, H0A

2. Expanded Functions

Inside the parameter (cont’d):

Status	S20LP	Ethernet
Abn	0: Normal complete
	1: Error complete
Busy	0: Initial state
	1: Transmission port busy
Status	0: Initial state
	1: While send requesting
	2: While waiting response
	3: Complete
TermSTS	H00: Normal complete
	H01: Register designation error
	H02: Response time-out
	H03: Parameter error
	H04: Register write protect
	H05: (Reserve)
	H06: Module error (send time-out)
	H07: No send channel
	H08: Invalid station No.
	H09: Transfer size error
	H0A: Boundary error
	H0B: Transmission error	Bit 7 indicates the error is occurred
	H0C: I/O no answer error	whether self-station or target-station.
	H0D: IC card designation error	0: Self-station
	H0E: (Reserve)	1: Target-station
	H0F: (Reserve)
Transmission error	When TermSTS is H0B, the error information is stored. (0 for other cases)
information	For detailed information, refer to the S20LP or EN311 manual.

Example

RW030	3				1		0
RW031				33			(H21)
RW032						200
RW033						5
RW034						5000
RW035						4
RW036						4000
RW037						50
RW038			H71				H85
RW039			H0A				H62
RW040						1024
RW060
	0	0	1		0		0
RW061						0

Ethernet, channel 1

Request command H21: Register read/write

Transfer size: 200 words Self-station F register Leading address: F5000 Target-station D register Leading address: D4000 Response time limit: 5 second Target-station IP address:

133.113.98.10 = H85.H71.H62.H0A Target-station UDP port No.: 1024

Send requesting

68 PROSEC T3H