Toshiba T721 Using the menus, Image adjustment menus, Default setting menu, Display setting menu

Using the menus (Continued)

■The image adjustment menus

Use this menu to adjust image-related items.

Items Items that can be adjusted are marked with “Yes”, and those that cannot are marked with “No”.

Item	Description		Computer	Y/PB/PR	Video	PC Card	Camera
					S-video
Contrast	Lower	Higher	Yes	Yes	Yes	Yes	Yes
Brightness	Darker	Brighter	Yes	Yes	Yes	Yes	Yes
Color	Lighter	Deeper	No	Yes	Yes	No	No
Tint [Note 1]	Reddish	Greenish	No	No	Yes	No	No
Sharpness	Softer	Sharper	No	Yes	Yes	No	Yes
R-level	Less red	More red	Yes	Yes	Yes	Yes	Yes
G-level	Less green	More green	Yes	Yes	Yes	Yes	Yes
B-level	Less blue	More blue	Yes	Yes	Yes	Yes	Yes
Up/down shift [Note 2]	Shift down	Shift up	No	Yes	Yes	No	No

Notes

1:Tint can only be adjusted when Video mode p.29 is NTSC or NTSC4.43.

2:Up/down shift can only be adjusted when Screen size p.55 is Wide.

■The default setting menu

This menu shows placement status and other settings.

Item		Description
Projection	Set projection mode in accordance with Placement Style p.21
mode	(Placed	(Rear)	(Hung from		(Back hung
	on floor)		ceiling)		from ceiling)
No signal	Set the time to wait after signal input stops until turning off the power:
power off	Off (not turned off)	1 min	2 min	...	60 min
Power on	Set whether to turn on the power when the ON/STANDBY button is pressed
	(Manual), or when the power cord is plugged in (Auto).			Manual	Auto
Lamp power [Note 1]	Set the lamp power		Standard		Low
Standby mode [Note 2]	Set standby mode according to functions used Standard				Economy

Notes

1:When lamp power is set to low, the screen becomes a little darker, but the cooling fan noise gets quieter. This setting will be cleared when you turn the power off. The setting will be back to “Standard” when the power is turned on next time.

2:The Standby mode function is only available with models equipped with a PC card slot p.41 .

Notes

•Note that if Power on is set to Auto, then if the power cord is plugged in when power is restored after a power outage, the projector power will come on.

•Even if Power on is set to Auto, press the ON/STANDBY button to turn off the power. Unplugging the power cord to cut off the power will shorten the life of the lamp.

■The display setting menu

Use this menu to set screen display-related items.

Item		Description
Screen size
Not displayed with	(Full): Display with LCD panel’s resolution
PC card input or	(Thru): Display with sampling resolution (for computer input)
camera input.	(Wide): Wide-screen display (for Video, S-video, and Y/PB/PR)
Language	Select one of the languages below to use for displaying menus and messages
	[ : Enter setting mode] [		:Selection]		[Apply:		]
	English/Français/Deutsch/Italiano/Español/
	Português/	/	/	/
Background	Screen to display when there is no input signal		(Logo)			(Blue)	(None)
Icon	Display icons as function guides				On		Off
Start-up screen	Display start-up screen when power turned on				On		Off

Note

•If “Thru” is selected for screen size, portions exceeding the pixel count of the LCD panel

p.69 will not appear on the screen. Note that for RGB signals with clock speeds UXGA 60 p.70 or lower, all input pixel signals are sampled. (This effect is noticeable when the screen is enlarged using the Resize function p.31 ). However, if the clock speed is higher than this, the RGB pixel signal is thinned before sampling.

■The PC card setting menu (Models equipped with PC card slot)

Use this menu to set PC Card-related items.

●When using a memory PC card

Item Description

Input select mode Manual Auto (Switch to PC card input when a PC card is inserted)

Auto. Demo Off On (Begin slid show when PC card is inserted)

Interval Select one of the following slide show display intervals:

5 sec./10 sec./30 sec./1 min./3 min./5 min./10 min.

File deletion Delete the selected file (Folders cannot be deleted)

[: Enter execution mode] [Yes No] [Apply:]

Operations

54 55