Operating the projector, Click on the File icon

Using the wireless LAN PC card (Continued)

■ Displaying a JPEG image saved on a computer via the projector		5 Select the projector to be transmitted.
1 Launch the Wireless Utility software application.		A list of the MAC addresses of the wireless LAN
The Screen image transmission mode window appears on the computer’s screen.		PC cards p.32 , p.60	mounted on the projectors
		that are available for transmission appears. If

2 Click on the File icon	.	projector name has been set up already, it is
		shown instead of the MAC address. Select the
The Wireless Utility window
		checkbox of the projector to be transmitted to from
changes to File transmission
		this list. Then icon	is displayed on the

mode.	projector’s screen for few seconds.
	projector’s screen for few seconds.
	It is possible to select up-to four projectors.

6 Click on the button.

The selected file’s image is displayed by the projector.

3Click on the Browse button, and select the file to send.

Clicking on the Browse button displays the Open dialog box. Select the file to send, then click on the Open button.

The selected file is added to the pull-down list in the Wireless Utility’s Transmission File field.

4Select the file to be sent from the pull-down

list of the Transmission File field.

Click on the Transmission File field’s button to display the pull-down list. Select the file to be sent from this list.

A thumbnail of the selected file appears in the Preview box. The file displayed here will be transmitted.

Step 3 can be skipped.

The way that drag and drop the file to be sent from the desktop or Windows Explorer into the Preview box is also available. In this case as well, the selected file is added to the file pull-down list Transmission File field’s.

Note

•Only one file can be sent at a time. To send another file, repeat steps 4 and 6 .