Specifications (Continued)
■List of supported signals (Y/PB/PR signals)
Signal format | fh(kHz) | fv(Hz) |
480i(525i)@60Hz | 15.73 | 59.94 |
|
|
|
480p(525p)@60Hz | 31.47 | 59.94 |
|
|
|
576i(625i)@50Hz | 15.63 | 50.00 |
576p(625p)@50Hz | 31.25 | 50.00 |
720p(750p)@60Hz | 45.00 | 60.00 |
720p(750p)@50Hz | 37.50 | 50.00 |
1080i(1125i)@60Hz | 33.75 | 60.00 |
1080i(1125i)@50Hz | 28.13 | 50.00 |
1035i(1125i)@60Hz | 33.75 | 60.00 |
1152i(1250i)@50Hz | 31.25 | 50.00 |
■List of supported signals (Video,
Video mode | fh(kHz) | fv(Hz) | fsc(MHz) |
NTSC | 15.73 | 60 | 3.58 |
PAL | 15.63 | 50 | 4.43 |
SECAM | 15.63 | 50 | 4.25 or 4.41 |
15.73 | 60 | 3.58 | |
15.63 | 50 | 3.58 |
■CONTROL terminal
●Pin assignment
1 2
4
3 | 5 |
68
7
Mini DIN 8 pin connector
●Interface format
1 Communication method
2 Communication format
3 Data format
4 Replies
Pin No. | Signal Name | Description |
1 | RXD | Receiving data |
2 | CTS | Consent to send |
3 | DSR | Data set ready |
4 | GND | Signal ground |
5 | RTS | Request to send |
6 | N.C | No connection |
7 | TXD | Sending data |
8 | N.C | No connection |
Stop Bit Length: 1 bit
STX (02h) Command (3Byte) ETX (03h) Only 1 command valid per communication.
For input commands, only
Acknowledge ACK (06h) No acknowledge NAK (15h)
15.73 | 60 | 4.43 | |
NTSC4.43 | 15.73 | 60 | 4.43 |
If commands are to be sent consecutively, wait for the response from the projector (ACK or NAK) before sending the next command.
●Main Commands
■Pin assignment of COMPUTER-1/2 & MONITOR terminals
Item | Command |
Item | Command |
11 | 15 | ||||
6 |
| 10 |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
1 5
Pin | Pin description | |
No. | During RGB input | During Y/PB/PR input |
1 | Video signal (R) | Color difference signal (PR) |
2 | Video signal (G) | Luminance signal (Y) |
3 | Video signal (B) | Color difference signal (PB) |
4 | GND | ∗ |
5 | GND | ∗ |
6 | GND (R) | GND (PR) |
7 | GND (G) | GND (Y) |
Power on | PON |
Power off | POF |
Icon display on | MO0 |
Icon display off | MO1 |
Auto setting (RGB input) | PAT |
Status display on | DON |
Status display off | DOF |
Computer (1) input select | IN1 |
Y/PB/PR (1) input select | IN2 |
Computer (2) input select | IN3 |
Y/PB/PR (2) input select | IN4 |
Video input select | IN5 |
IN6 | |
PC card input select | IN7 |
Camera input select | IN8 |
Mini D sub 15 Pin connector
Input Signal
• RGB input
R/G/B signals: | 0.7V |
Horizontal sync signal: | TTL level (Pos/neg polarity) |
Vertical sync signal: | TTL level (Pos/neg polarity) |
•Y/PB/PR input
Y signal: | 1.0V |
PB/PR signals: | 0.7V |
8 | GND (B) | GND (PB) |
9 | N.C | ∗ |
10 | GND | ∗ |
11 | GND | ∗ |
12 | N.C | ∗ |
13 | Horizontal sync signal | ∗ |
14 | Vertical sync signal | ∗ |
15 | N.C | ∗ |
∗Do not connect anything.
Note
•Contact your dealer for control cable and other commands.
■Separately Sold Product
Replacement Lamp | Model TLPLW2 |
Note
•Design, specifications, etc. subject to change without notice for improvements, etc.
Others
70 | 71 |
