TMP92CM22 2007-02-16 92CM22-50

Table 3.5.2 I/O Port Setting List (1/2)

I/O Register Setting Value

Ports Input Pins Specification Pn PnCR PnFC PnODE

Input port × 0
Output port × 1 0
Port 1 P10 to P17
D8 to D15 bus × × 1
None
Input port* × 0*
Output port* × 1* 0
Port 4 P40 to P47
A0 to A7 output × × 1
None
Input port* × 0*
Output port* × 1* 0
Port 5 P50 to P57
A8 to A15 output × × 1
None
Input port* × 0*
Output port* × 1* 0
Port 6 P60 to P67
A16 to A23 output × × 1
None
P70 to P75 Output port × None 0
P70 RD output
P71 WRLL output
P72 WRLU output
P74 CLKOUT output
P75 R/Woutput
× None 1
Input port × 0 0
Output port × 1 0
Port 7
P76
WAIT Input × 0 1
None
P80 to P83 Output port × 0
P80 CS0 output × 1
P81 CS1 output × 1
P82 CS2 output × 1
Port 8
P83 CS3 output ×
None
1
None
Input port × 0 0 0
P90 to P92
Output port �� 1 0 0
SCK input × 0 0 0 P90
SCK output × × 1 0/1
SO output × 1 1 0/1 P91
SDA × × 1 1
SI input × 0 0 0
Port 9
P92
SCL (Open drain) × × 1 1

X: Don’t care

*: When these ports are used as general-purpose I/O port, each bit can be set individually for input or

output. However, each bit cannot be set individually for input or output even if 1bit or more bits are

used as address bus in same port.

All of general-purpose I/O ports except for port that used as address bus are operated as output

port.

Please be careful when using this setting.