Qosmio X870/X875 series
Use a point size 0 Phillips screwdriver to remove and fasten the screws - the use of an incorrect screwdriver can damage the screw heads.
Installing a memory module
To install a memory module, follow the steps as detailed below:
1.Shut down the computer - make sure the Power indicator is off (refer to the Turning off the power section, if required).
2.Remove the AC adaptor and all cables and peripherals connected to the computer.
3.Close the display panel.
4.Turn the computer upside down and remove the battery pack (refer to Replacing the battery pack section, if required).
5.Loosen the screw securing the memory module cover in place - please note that the screw is attached to the cover in order to prevent it from being lost.
On some models, you need to remove the protection rubber before loosening the screw.
6.Slide your fingernail or a thin object under the cover and lift it off.
Figure 4-12 Removing the memory module cover
21
1. Memory module cover2. Screw
Product appearance depends on the model you purchased.
User's Manual |
