Toshiba X875, X870 user manual Hdmi Device, Connecting the Hdmi out port

Qosmio X870/X875 series

HDMI Device

An HDMI display device can be connected to the HDMI out port on the computer. To connect the HDMI display device, follow the steps as detailed below:

As the port operation of all HDMI (High-Definition Multimedia Interface) display devices have not been confirmed, some HDMI display devices may not function properly.

Connecting the HDMI out port

1.Plug one end of the HDMI cable into the HDMI in port of the HDMI display device.

2.Plug the other end of the HDMI cable into the HDMI out port on your computer.

Figure 4-19 Connecting the HDMI out port

1

2

1. HDMI out port 2. HDMI cable

Please do not plug/unplug an HDMI display device under the following conditions:

The system is starting up.

The system is shutting down.

When you connect a television or external monitor to the HDMI port, the display output device is set to HDMI.

When you unplug the HDMI cable and re-plug it, please wait at least 5 seconds before you re-plug the HDMI cable again.

When you change the display output device by function key, the playback device may not switch automatically. In this case, in order to set the playback device to the same device as the display output device, please adjust the playback device manually by the following steps:

1.Click Desktop -> Desktop Assist -> Control Panel -> Hardware and Sound -> Sound.

2.In the Playback tab, select the playback device which you want to switch to.

User's Manual 4-50