1. Introduction
The TEG-S3000i chassis switch is a modular switch that can be used to build high-performance switched workgroup networks. This switch is a store-and-forward device that offers low latency for high-speed networking. The Switch is designed for workgroup, department or backbone computing environments.
The TEG-S3000i chassis switch features a “store-and-forward “ switching scheme. This allows the switch to auto-learn and store source address in an 8K-entry MAC address table.
MDI (Medium Dependent Interface) Port is also called an "uplink port". The MDI port does not cross transmit and receive lines, which is done by the regular ports (MDI-Xports) that connect to end stations. In general, MDI means connecting to another Hub or Switch while MDIX means connecting to a workstation or PC. Therefore, Auto MDI/MDIX means that you can connect to another Switch or workstation without changing straight-through or crossover cabling.
The TEG-S3000i chassis switch has 4 module slots that give users flexible configuration. Users can choose from a wide selection of exclusive modules to help increase the number of copper ports available or extend distances from one switch to another by using fiber optics.
Features
Conforms to IEEE802.3u 10BASE-T, 802.3u 100BASE-TX/FX, 802.3ab 1000BASE-T, 802.3z Gigabit fiber
4 slots for 8 ports 10/100TX, 8 port 100FX and Gigabit uplink module
IEEE802.3x Flow control
¾Flow control for full duplex
¾Backpressure for half duplex
5
