
Console Port Information
Console is a standard UART interface to communicate with Serial Port. User can use windows HyperTerminal program to link the switch. Please refer to Console Management Æ Console login for detail steps.
Console port information shows as follow:
Bits per seconds: 9600
Data bits: 8
Parity: none
Stop Bits: 1
Flow control: none
Console Port Information interface
Port Controls
You can change the port status.
1.Select the port by scroll the list in Port column.
2.State: User can disable or enable this port control.
3.Negotiation: User can set auto negotiation mode is Auto, Nway (specify the speed/duplex on this port and enable
4.Speed: set the speed of each port.
5.Duplex: set
6.Flows control: set flow control function is ON or OFF in Full Duplex mode.
7.Back Pressure: set Back Pressure is ON or OFF in Half Duplex mode.
8.Band Width: The port1 ~ port 24, supports port ingress and egress rate control. For example, assume port 1 is 10Mbps, users can set it’s effective egress rate is
87