Aggregator Information State Activity
When you had setup the LACP aggregator, you can configure port state activity. You can mark or 
button the port state activity will change to Active. Opposite is Passive.
1.Active: The port automatically sends LACP protocol packets.
2.Passive: The port does not automatically send LACP protocol packets, and responds only if it receives LACP protocol packets from the opposite device.
Note:
1.A link having either two active LACP ports or one active port can perform dynamic LACP trunking.
2.A link has two passive LACP ports will not perform dynamic LACP trunking because both ports are waiting for and LACP protocol packet from the opposite device.
3.If you are active LACP’s actor, when you are select trunking port, the active status will be created automatically.
Trunking – State Activity interface
91
