4.Negotiation: set auto negotiation status of port.
5.Speed/Duplex: set the port link speed and duplex mode.
6.FC: enable or disable Flow control function (Flow control for full duplex link mode).
7.BP: enable or disable Back Pressure function (Backpressure for half duplex mode).
8.Bandwidth In/ Out: per port packet transmission rate control. Per level is 100Kbps. It supports individual control method of TX and RX.
9.Priority: set port to high or low priority.
10.Security: enable or disable port security function.
11.Select the <Save>.
Port Configuration interface
Trunk Configuration
You can configure port trunk group.
1.Select <Edit>
2.Using “Tab” key move to the port that want to be added as trunk group.
3.Using “Space” key to mark the port.
4.Using Tab key move to Trunk# (ex. Trunk1, Trunk2…) to change the Trunk# value
30
