802.1X

When enabling the IEEE 802.1X function, you can configure the parameters of this function.

System Configuration

1.Radius Server IP: set the Radius Server IP address.

2.Server Port: set the UDP destination port for authentication requests to the specified Radius Server.

3.Accounting Port: set the UDP destination port for accounting requests to the specified Radius Server.

4.Shared Key: set an encryption key for use during authentication sessions with the specified radius server. This key must match the encryption key used on the Radius Server.

5.NAS, Identifier: set the identifier for the radius client.

6.Click

Apply .

802.1x Configuration – System Configuration interface

Per port Configuration

1.Select the port in Port column.

2.Select the state of port. There are four states:

110

Page 112
Image 112
TRENDnet TEG-S3000I manual 802.1X, System Configuration