TRENDnet User’s Guide
9.Next to Name, you can enter another name for the virtual server, otherwise, leave the default name.
10.Next to Protocol, make sure TCP is selected in the
11.The Private Port and Public Port, make sure port number 80 is configured for both settings.
12.Next to LAN Server, enter the IP address assigned to the camera. (e.g. 192.168.10.101)
13.To save the changes, click Update.
Special Applications
Access > Special AP
Special applications (also called port triggering) is typically used for online gaming applications or communication applications that require a range of ports or several ports to be dynamically opened on request to a device on your network. The router will wait for a request on a specific port or range of ports (or trigger port/port range) from a device on your network and once a request is detected by your router, the router will forward a single port or multiple ports (or incoming port/port range) to the device on your network. This feature is not typically used as most devices and routers currently use UPnP (Universal Plug and Play) to automatically configure your router to allow access for applications. See “Enable/disable UPnP on your router” on page 29.
Note: Please refer to the device documentation to determine if your device supports UPnP first, before configuring this feature.
1.Log into your router management page (see “Access your router management page” on page 24).
2.Click on Access, and click on Special AP.
To simplify configuration, there is a list of commonly used
3.Review the special application settings.
•Enabled – Selecting Enabled turns on the special application and selecting Disabled turns it off.
•Name – Enter a name for the special application.
•Trigger – Port or port range requested by the device.
o Protocol – Select the protocol requested by the device. TCP, UDP, or you can select Both to choose both TCP and UDP.
o Port Range – Enter the ports or port range requested by the device. (e.g.
© Copyright 2012 TRENDnet. All Rights Reserved.
33
