33. Upgrading the NetCommander IP Firmware (Continued)

Connecting the RS-232 Serial Firmware Upgrade Cable

To run the firmware upgrade software, you must first connect the RS-232 Serial Firmware Upgrade cable between the B072-016-1-IP and a separate computer (One not connected to the KVM switch) containing the firmware upgrade software. Note: Each cascaded KVM Switch must be updated separately. When you’re done updating the first KVM Switch, attach the RS-232 Serial Firmware Upgrade cable between each cascaded KVM and the Update Computer. For the firmware upgrade to take place, the Serial Port option in the OSD General Settings Menu must be set to On. If it is set to Off, you will not be able to perform a firmware upgrade. When password security is turned on, the only person who can turn the Serial Port option On and Off is the administrator.

[update the back panel to the correct artwork. It should be a straight on view.]

Installing the Software

 

 

 

SERIAL

9

10

11

12

13

14

15

16

 

 

 

 

 

 

 

 

 

 

 

 

 

INTEGRATED

 

 

 

 

 

 

 

 

 

 

 

 

CONSOLE PORTS

 

 

 

 

 

 

 

 

 

 

 

 

16-PORT CONSOLE KVM SWITCH

100-240VAC, 50/60 Hz

KVM CONSOLE PORTS

UPGRADE

LAN

1

2

3

4

5

6

7

8

MODEL: B070-016-19-IP

 

To Flash connector

RS232 Download cable

Update software installed here

SIUs to servers

To install the KVM Switch Update software:

1.Download KVM update software from www.tripplite.com

2.Run the software. If there is no firmware upgrade currently available, there will be nothing posted on www.tripplite.com

Starting and Configuring the KVM Update

1.Start the KVM Update software. The KVM Update window appears (see figure below).

The table below explains the functions of the buttons and boxes in the KVM Switch Update window.

2.From the Options menu choose Com Port. The Com Port box appears (see figure below).

3.Select the COM Port of the Upgrade Computer that you connected the RS232 Serial Firmware Upgrade Cable to. If it is not connected to the COM Port you’ve chosen, the Firmware Upgrade will fail.

24

Page 24
Image 24
Tripp Lite B072-016-1-IP warranty Connecting the RS-232 Serial Firmware Upgrade Cable, Installing the Software