Tripp Lite B072-016-1-IP warranty Important Safety Instructions

1. Instructions

Tripp Lite’s NetCommander™ IP KVM Switch is ideal for controlling multiple servers over inexpensive Cat5e cable from a single console (keyboard, mouse and display). It includes the following premium features:

•16-Port IP KVM Switch.

•Access and control multiple computers from a single console (local or remote).

•Achieves BIOS-level control of any server, regardless of server condition and network connectivity. Covers the entire spectrum of crash scenarios.

•Compatible with all major operating systems. Supports many hardware and software configurations for the remote client, target server and KVM switch, including USB and PS/2 port connections.*

•Secures control of target server from any location via Web browser and standard IP connection.

•Allows multiple simultaneous users to view remote sessions. Remote control is transferable between users with appropriate permissions.

•Supports the highest security standards for encryption (128-bit SSL and HTTPS) and authentication for remote users. Advanced OSD management with multi-layer security for local users.

•Uses inexpensive and commonly available Cat5 patch cables (maximum distance 33 ft.) to connect to each computer.

* Mac not supported over IP.

2. Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that should be followed during the installation and operation of this product. Failure to comply may invalidate the warranty and cause property damage and/or personal injury.

Installation Warnings

•Install the KVM switch in a controlled indoor environment, away from moisture, temperature extremes, flammable liquids and gasses, conductive contaminants, dust and direct sunlight.

•Operate the KVM switch at indoor temperatures between 32° F and 104° F (0° C and 40° C).

•When connecting the KVM switch to the facility’s power supply circuit, ensure that the circuit is not overloaded.

Rackmount Warnings

•Ensure there is adequate airflow within the rack.

•Mount the KVM switch evenly within the rack to eliminate potentially hazardous uneven mechanical loading conditions.

•Ensure all rackmount equipment is reliably grounded.

Connection Warnings

•Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.

•Ensure that the cables used with the KVM switch are not close to any sources of electrical noise interference such as fluorescent lights, HVAC systems or motors.

•Ensure that the distance between any computer and the KVM switch does not exceed 33 ft (10 m).

•Shut down all PS/2 computers before connecting the keyboard, monitor and mouse to ensure they will be recognized by the computer.

Maintenance Warnings

•The KVM switch does not require routine maintenance. There are no user-serviceable parts inside. Only authorized service personnel should open the case for any reason. Disconnect the unit from AC input power before servicing.

2