True Fitness Z7 Series manual E6 Level and Blink Codes

E6 Level and Blink Codes

CARE AND MAINTENANCE

E6 LEVEL AND BLINK CODES

The failure code displayed will be “E-5 Sensor” when receiving the E5 Sen- sor error, enter diagnostic mode and check the error log. Below is a list of status display codes. When the drive is faulted, the Status LED blinks out the default code. The code will blink the proper number of times, pause with the LED off, and then repeat the code.

STATUS CODE	DESCRIPTION	IMPLICATION
No Blink (Steady On)	No Faults	Running
Fast (Steady Blink)	No Faults		Ready
LED Off	AC Line Power	No or Low Voltage
	Insufficient
1 Blink (E601)	100% Command	Runaway Command
2 Blink (E602)	Sensor Feedback Error	Sensor Error
3 Blink (E603)	Voltage Trip Error	Motor Issue
4 Blink (E604)	Output Over Current	High Motor Current
5 Blink (E605)	Control Supply Under	Inadequate Power Line
	Voltage
6 Blink (E606)	Drive Over Temperature	MCB Over Tempera-
			ture
7 Blink (E607)	AC Over Voltage	Line Voltage Too High
8 Blink (E608)	Output Short Circuit	Short Circuit to Motor

CARE AND MAINTENANCE

Z 7 Tr e a d m i l l O w n e r ' s G u i d e

63