True Fitness Z7 Series manual Maintenance Schedules, Daily Care and Service

Maintenance Schedules

CARE AND MAINTENANCE

CAUTION

Servicing is to be done with appliance disconnected from the supply circuit. To disconnect, turn all controls to the off position, then remove the plug from the outlet.

DAILY CARE AND SERVICE

WEEKLY CARE AND SERVICE

To extend the life and appearance of your TRUE Z-Series treadmill, we recommend that you perform the following steps daily:

1.Wipe clean your TRUE Z-Series Treadmill to remove perspiration. We also recommend that you encourage your employees and clients to wipe perspiration from the unit after each use. Use a damp soft towel or cloth.

NOTE: Do not wipe under the treadbelt when cleaning dust or debris off the unit as this may damage the treadbelt and deck.

2.Unplug the unit during nonbusiness hours to prevent damage caused by power surges.

To extend the life and appearance of your TRUE Z-Series treadmill, we recommend that you perform the following tests and inspections weekly:

1.A test of all the keys including the Express Keys.

2.Inspection of the power cord for frayed or damaged areas.

3.Inspection of the power cord ground plug.

4.Inspection of the circuit breaker to see if it is tripped.

5.Inspection of the treadbelt for proper tension and alignment.

6.Check that the handrail screws are tight.

7.Check that the ON/OFF switch toggles on and off.

8.Check that the pedestal screws, pedestal hinge screws, and motor cover screws are tight.

9.Check that the heart rate contacts are working.

CARE AND MAINTENANCE

Z 7 Tr e a d m i l l O w n e r ' s G u i d e

59