Turbo Chef Technologies HHB-8114, HHB-8708 owner manual Ordering a Smart Card

OPERATING THE OVEN 21

< 1ST GROUP>		COOK TIME	00:00	FIRST ITEM
		RACK ON
EVENT	1	2	3	4
% TIME	100	0	0	0
% AIR	100	100	100	100
TEST		WARMING UP

LEFT

RIGHT

Step: 7a	The field selected
	to be modified will
	be bracketed.

Throughout this process, the oven	Step: 7b	Step: 7c
warms up in case the operator wishes
to test a new/modified recipe.

F I G U R E 24: Navigating the Food Item Menu

< 1ST GROUP>		COOK TIME		00:00	FIRST ITEM
			RACK ON			LEFT
EVENT	1	2		3	4
% TIME	100	0		0	0
% AIR	100	100		100	100	RIGHT
TEST			WARMING UP

Step: 9 Step: 8a	Step: 8d	Step: 8b	Step: 11
	Step: 8c	Step: 8e	Step: 10

F I G U R E 25: Modifying Recipes – Steps 8-11

9.To test settings before saving, press the bottom- left soft key. The oven will initiate a cook cycle to the specifications of new settings.

10.To save settings, keep pressing ENTER until “Settings Saved” is displayed.

11.Press the BACK/STOP key three times to exit the menu (doing so before saving settings will erase changes).

Ordering a Smart Card

To order a Smart Card, call 800.90TURBO,

+1 214-379-6000, or your Authorized Distributor.

Loading Menu from Smart Card (Figures 26 and 27)

CAUTION: Loading a menu from a smart card will overwrite all existing recipes

programmed into the oven.

To load a menu from a smart card:

1.Ensure oven is in either the COOL-DOWNor OFF state.

2.Insert the smart card into the smart card reader. Orient card as shown in Figure 26.

3.Press bottom-left soft key.

4.Press the middle-left soft key to “Load Menu from Card” (Figure 27).

5.Press ENTER to confirm or BACK/STOP to cancel.

After approximately 5 seconds, screen will display that menu has loaded from card.