Tyco 0-1591099-x manual Port Stackable Managed Switch - User Guide, Page, IP Configuration

Models: 0-1591099-x

1 56
Download 56 pages 59.12 Kb
Page 18
Image 18
IP Configuration

24 Port Stackable Managed Switch – User Guide

Page

18

IP Configuration

This screen is used to set the IP address, Sub-Net Mask and Default Gateway, DHCP client functionality for the Switch. These settings are only required if the Switch is to be managed over the network using Telnet, a web browser or SNMP.

Figure 19. IP Configuration Screen

This menu enables the IP address of the Switch to be configured. To change the IP Switch setting:

1.Use the <tab> to highlight the <edit> field in the action line and press <enter>

2.The cursor will highlight the DHCP client field.

3.Use <tab> key to highlight the IP address field.

4.Enter the new IP Address as required.

5.Use <tab> key to highlight the Subnet Mask field.

6.Enter the Subnet mask address as required.

7.Use <tab> keys to highlight the default gateway field.

8.Enter the IP address of the default gateway as required.

9.Use the <esc> key return to the action line and then tab to the <apply> field and then select the <apply> using the <enter> key to save the IP address changes.

10.Navigate up to the Main Menu using the <esc> key and then select the Save Configuration. This will save the IP address configuration to Flash Rom.

11.After saving the configuration reboot the Switch for IP address configuration to take affect.

12.After rebooting the Switch it is advisable to check that IP changes have been made current by checking the Administration Configuration>IP Configuration menu again.

NOTE: The Switch can also acquire its IP configuration automatically via DHCP by enabling DHCP client from the IP configuration screen.

Product Number 0-1591099-x

© Tyco Electronics 2005

Issue 1

Page 18
Image 18
Tyco 0-1591099-x manual Port Stackable Managed Switch - User Guide, Page, IP Configuration Screen