Tyco 0-1591099-x manual Port Stackable Managed Switch - User Guide, Page, State Activity

Models: 0-1591099-x

1 56
Download 56 pages 59.12 Kb
Page 37
Image 37
State Activity

24 Port Stackable Managed Switch – User Guide

Page

37

Having selected working ports from the LACP Configuration screen the above is displayed. Select <edit> from the action line and enter the number of ports to be working port. Press <esc> to return to the action line and <apply> to save the configuration.

State Activity

If a LACP trunk has been configured it is possible to set the port to the following modes:

Active (default) – The port automatically sends LACP packet to the neighbor device to establish a trunk connection

Passive – The port waits for a LACP packet from the neighbor device before establishing a LACP trunk connection.

NOTE: One or both ends of the trunk link must be set to ‘Active’.

Figure 33. LACP State Activity Screen

After selecting this option from the LACP configuration the screen above will appear. Now select <edit> from the action line. Use the <tab> key to highlight the port to be modified and press the <spacebar> to toggle between Active and Passive modes. Having made the selection press <esc> to return to the action line and <apply> to save the configuration.

Product Number 0-1591099-x

© Tyco Electronics 2005

Issue 1

Page 37
Image 37
Tyco 0-1591099-x manual Port Stackable Managed Switch - User Guide, Page, LACP State Activity Screen