24 Port Stackable Managed Switch – User Guide | Page | 44 |
To ensure that the stack has been properly configured click on the ‘IP Stacking’ in the side menu and a window similar to below will appear:
Figure 40. IP Stacking Screen
If the Stacking Configuration has been successful, then the IP Stacking screen will show a list of MAC addresses and System names, which are Hyperlinks. It is now possible to manage any member Switch in the stacking group by clicking on the Switch Hyperlink. The Switch that is currently being managed is indicated by >> and <<. Having selected a Switch to manage, any actions performed using this web interface will affect the selected Switch only.
NOTE: If a Stack of Switches needs to be disbanded using Web Based Management, then Disable Stacking mode on the Slaves first, and lastly Disable Stacking mode on the Master Switch.
Backup Master
The Stack will remain manageable if the Master Switch fails or looses network connectivity. If this should happen then the BackupMaster will go active and maintain the manageability of the Stack. The BackupMaster is elected by the lowest MAC address in the Stack and no user configuration is needed. The IP Stacking screen (Figure 40.) is used to determine the current Master and BackupMaster Switch.
NOTE: The IP address used to manage the Stack, after the Master Switch fails, remains unchanged.
Product Number | © Tyco Electronics 2005 | Issue 1 |