| 24 Port Stackable Managed Switch – User Guide | Page | 9 |
Rack-mounted Installation
The 24 Port Stackable Managed Switch is supplied with a
Perform the following steps to rack mount the Switch:
Position one bracket to align with the holes on one side of the Switch and secure it with the smaller bracket screws. Then attach the remaining bracket to the other side of the Switch.
Figure 6. Attach mounting brackets with screws
After attaching both mounting brackets, position the Switch in the rack by lining up the holes in the brackets with the appropriate holes on the rack. Secure the Switch to the rack with the
Figure 7. Mount the Switch in an EIA standard 19-inch Rack
NOTE: For ventilation allow at least 4 inches (10 cm) of clearance on the front and
3.4inches (8 cm) on the back of the Switch. This is especially important for enclosed rack installation.
Product Number | © Tyco Electronics 2005 | Issue 1 |
