Tyco 0-1591099-x Port Flow Control FC, Back Pressure BP, Bandwidth In/Out, Priority, Security

24 Port Stackable Managed Switch – User Guide Page 21

Port Flow Control (FC)

This allows a full-duplex port to negotiate with connected equipment to implement a flow control process using embedded Pause frames. The default setting is ON.

Back Pressure (BP)

This allows a half-duplex port to use back pressure as a method of flow control. The default is OFF.

Bandwidth In/Out

Limits a port transmit and receive bandwidth. The bandwidth limiting can be configured between 0 - 999 in 100Kbps increments. The default is 0, which is no rate limiting.

Priority

Configures a port to be high or low priority. Packets entering this port will be assigned a priority and will follow the rule as defined in the Priority Configuration menu. The default is Disable.

Security

Stops a port from learning new MAC addresses, which is useful when security is needed to disallow an unauthorized connection to the port. This can be used in conjunction with Static MAC Address Configuration to allow only a known and authorized MAC address to use this port. The default is OFF.

Product Number 0-1591099-x © Tyco Electronics 2005 Issue 1