U-Line CLRCO2175, CLR2160 manual Door Shelf Removal/Insertion, Glass Shelf Removal/Installation

Door Shelf Removal/Insertion

1

2

ULIN_0039_A

Figure 28

To remove the door shelf:

1.Grasp shelf in center, lift slightly, and tilt 15°-20°.

2.Carefully pull shelf off bosses (Figure 28, 2).

To install the door shelf:

1.Holding shelf in center, align notches (Figure 28, 1) in shelf with bosses (Figure 28, 2) in door.

2.Tilt shelf at a 15°-20° angle and slide onto bosses at the desired location.

Glass Shelf Removal/Installation

2

1

ULIN_0276_A

Figure 29

1.Pull shelf out about 6" (Figure 29, 1) until back of shelf clears the "hump" on the right-hand side.

2.Tilt right-hand edge of shelf up.

3.Remove shelf from unit by pulling out (Figure 29, 2).

Insert the shelves as follows:

1.To move to a different position in the unit, insert shelf at an angle, approximately 15-20°, over the rib in the side of the unit where you want to place the shelf. The shelf must be started into the unit at an angle to clear the door.

2.Continue to slide the shelf into the unit at an angle until it clears the door.

3.Lower the shelf and push it in completely.

18 CLR2160, CLRCO2175