8 Prepare Power Supply
9 Service
Electrical Specifications
CAUTION
Electrical installation must observe all state and local codes. This unit requires connection to a grounded
The unit requires a grounded and polarized 115 VAC,
60 Hz, 15A power supply (normal household current). An individual, properly grounded branch circuit or circuit breaker is recommended. GFCI (ground fault circuit interrupter) is usually not required for fixed location appliances and is not recommended for your unit because a GFCI could be prone to nuisance tripping. However, be sure to consult your local codes.
See Figure 41 for recommended receptacle location. Plugging the unit into a receptacle located behind an adjacent cabinet will allow the CLRCO2175 to be more easily serviced with
|
| Preferred |
Acceptable | 24" | Location |
for CLRCO2175 | ||
Location |
| Receptacle |
7" |
|
|
|
|
Figure 41
WARNING
SHOCK HAZARD — Electrical Grounding Required.
•Never remove the round grounding prong from the plug and never use a
•Never use an extension cord to connect power to the unit.
Before Calling for Service
If your
If Service is Required
If you do not understand a troubleshooting remedy, or your product needs service, contact
You will be asked for your product Model and Serial Numbers. This information should be recorded inside the front cover of this guide, following the products original purchase. It also appears on the Model and Serial number plate located on the upper right or rear wall of the interior of your product.
Replacement Parts
When you need replacement parts, always request that genuine
CLR2160, CLRCO2175 | 23 |