system information. This web sites is not affiliated with Uniden Corporation.
For more information about Uniden and our other products, visit http://www.uniden.com.
SETTING UP YOUR SCANNER
These guidelines will help you install and use your new scanner.
If your scanner receives interference or electrical noise, move the scanner or its antenna away from the source. You might also try changing the height or angle of the rubber antenna.
To improve the scanner’s reception, use an optional external antenna designed for multiband coverage. (You can purchase this type of antenna at a local electronics store). If the optional antenna has no cable, use 50 ohm coaxial cable for
Use an optional mono earphone or stereo headset with proper impedance for private listening. Read the precautions on the inside front cover of this Owners Manual.
Do not use the scanner in
Avoid placing the scanner in direct sunlight or near heating elements or vents.
Connecting the Antenna
1.Align the slots around the antenna's connector with the tabs on the scanner's BNC connector.
20
