Setting Channel Delay

This setting controls how many seconds the scanner waits after a transmission ends before resuming scanning. If you select a minus delay time, the scanner stops on the transmission for the setting time, then automatically resumes scanning. (Default = 2 seconds)

1.To select a channel, press Hold then enter the channel number.

2.Press Pgm/E to enter the Channel menu. (You can also press Hold and scroll to the channel; press Func then Pgm/E.)

3.Scroll to Set Delay and press Pgm/E.

4.Turn Scroll Control to select the delay time from the following options:

-10 sec - resumes after 10 seconds.

-5 sec - resumes after 5 seconds.

0 sec - resumes immediately.

1 sec - waits 1 second for a reply then resumes.

2 sec - waits 2 seconds for a reply then resumes.

3 sec - waits 3 seconds for a reply then resumes.

4 sec - waits 4 seconds for a reply then resumes.

5 sec - waits 5 seconds for a reply then resumes.

5.Press Pgm/E to save and return to the Channel menu.

Deleting Channels

You can delete all programming for a channel.

42

Page 42
Image 42
Uniden BC125AT owner manual Setting Channel Delay, Deleting Channels