CLOSE CALL
Using the Close Call Feature
Unlike searching, which requires the scanner to tune to a frequency to check for a transmission, Close Call RF capture directly detects the presence of a strong, nearby signal and tunes to that frequency.
Close Call RF capture works great for finding frequencies at venues such as malls and sporting events. You can set the scanner so Close Call detection works "in the background" while you are scanning other frequencies, turn off normal scanning while Close Call is working, or turn off the Close Call feature and use the scanner normally. You can set the scanner so it alerts you when the Close Call feature detects a frequency. and you can also set the frequency bands where you want the scanner to look for transmissions.
The scanner also automatically stores the last 10 hits received into a temporary bank called "Close Call Hits" in any Close Call mode. The hits go away when you cycle power. You can also store these temporary frequencies into channel storage banks.
Close Call capture works well for locating the source of strong local transmissions such as mobile and handheld
57
