2.Turn Scroll Control to adjust the volume level from 0 to 15.
3.Press Scroll Control to set the volume.
4.To exit Volume Level mode, press Scroll Control again or wait 10 seconds to return to the previous mode.
Adjusting the Squelch
To adjust the squelch level, press Func, then press Scroll Control. When the squelch level indicator and battery voltage appear, turn Scroll Control to change the squelch level from 0 to 15.
1.Press Func, then press Scroll Control. The squelch level indicator and battery voltage appears.
2.Turn Scroll Control until the audio mutes. If the scanner picks up unwanted partial signals or very weak transmissions, increase the Squelch setting to increase the signal level required to open squelch. To listen to a weak or distant station, decrease the Squelch setting.
3.Press Scroll Control to set the desired level and return to the previous mode.
Setting the Backlight
Press 
to turn on the backlight on and off.
1.Press Func and 
to view the Display/Charge menu.
2.From this menu, scroll to Set Backlight from the submenus. Press SCROLL CONTROL.
3.Scroll to select one of the following settings:
• Always Off - Backlight is always off.
33
