Operating Temperature | Uniden BC125AT instruction

Operating Temperature:	– 20º C (– 4ºF) to + 60ºC (+ 140º F)
Close Call	– 10º C (+ 14ºF) to + 50ºC (+ 122º F)
Power Requirements:	2 AA Rechargeable Ni-MH Batteries
	(2.4V DC)
	2 AA Alkaline Batteries (3.0V DC)
	Connect to PC with USB cable
	(5.0V DC 500mA)

LCD Display: 64 X 128 Full Dot Matrix LCD with orange-color backlight.

Internal Speaker: 24ohm, 32mm diameter, Dynamic Type, 0.8W Max.

Certified in accordance with FCC Rules and Regulations Part 15 Sub-part C as of date of manufacture.

Scan Banks: 10 banks

Scan Channels: 500 Channels (50 Channels/Bank)

Service Searches: 10 Bands Police Fire/Emergency HAM Radio Marine Railroad

Civil Air Military Air CB Radio

66

Image 66

Uniden BC125AT owner manual Operating Temperature

Contents

BC125AT Owners Precautions Earphone Warning Contents Programming Channels Weather Operation FCC Wants You To Know Scanning Legally Introduction Feature Highlights Direct Access lets you directly access any channelPage Page Frequency Range Step Mode Band Lower Upper USA Band Plan Included with Your Scanner Optional Accessories What is Scanning?Scanning Basics What is Searching? What is CTCSS/DCS?Understanding Scanning Conventional Scanning Simplex Operation Repeater Operation Understanding Banks Where To Learn MoreService Search Banks Channel Storage Banks Setting UP Your Scanner Connecting the Antenna Connecting an Earphone/Headphone Connecting an Extension SpeakerConnecting an Optional Antenna Adjusting the Belt Clip Powering the Scanner Installing Non-Rechargeable Batteries Installing Rechargeable Ni-MH Batteries Charging the Ni-MH Batteries USB Message Batt Meaning Scanner Type Cond About Your Scanner Getting to Know the Scanner Pri Weather menuClr Scan FuncHold Srch Pgm/E Turning On the ScannerPlay/Charge Programming Look At The Display Item Meaning Scan/Service Search/Custom Search/Close Call Only mode Setting Up Your Scanner Using the Scroll Control KnobAdjusting the Volume Adjusting the Squelch Setting the Backlight Adjusting the Contrast Setting the Charging Timer Display/Charge menu Resetting the Scanner Using the Keypad LockSetting the Beep Tone All Memory Clear displays Programming Channels Programming Channel Text Tags Setting CTCSS/DCS for a Channel Setting Channel Modulation Channel menu Setting the Priority Channel Setting Channel Delay Deleting Channels Scanning Stored Channels Clearing a BankPage Priority Scan Modes Manually Selecting a Channel Locking Out Channels Unlock all Channels in Banks Currently Enabled for Scan To Lock Out a Specific ChannelUnlocking Channels Service Search Mode Service Search Receive/Hold Modes Custom Search Mode Frequency MHz Step kHz Quick Search Mode Custom Search Receive/Hold Modes Quick Search Receive/Hold Modes Search Delay Search Options CTCSS/DCS Search Turn Scroll Control to CTCSS/DCS Search and press Pgm/EProgramming Custom Search Ranges Storing Found Search Frequencies Locking Out Search Frequencies Unlocking Search Frequencies Using the Close Call Feature Close Call Close Call Only Mode Selecting Close Call ModesClose Call Menu Page Set Close Call Bands Close Call Alert Close Call Hits Bank Close Call Delay Weather Operation Searching for a Weather BroadcastClose Call CTCSS/DCS Search Weather Alert Standby Technical Specifications Weather Alert PriorityTo exit Weather Alert Standby mode, press Scan Operating Temperature NFM 138.150 MHz 157.100 MHz Signal Noise Ratio nominal VHF Low Band 25.0050 MHz Rbrc Information References Ctcss Frequencies DSC Codes Birdies Warranty One Year Limited WarrantyPage Procedure for Obtaining Performance of Warranty