To permanently lock out a frequency, press L/O twice quickly.

To exit Quick Search, press Scan.

See also Search Options on page 53 for Delay, CTCSS/DCS settings, and locking out/reviewing/unlocking frequencies.

Search Options

Search Delay

This setting controls how many seconds the scanner waits after a transmission ends before resuming searching. If you select a minus delay time, the scanner stops on the transmission for the setting time and then automatically resumes scanning. (Default = 2 seconds)

1.Press Func then Pgm/E in Service, Custom, or Quick Search/Search Hold mode to view the Search menu.

2.Scroll to Set Delay and press Pgm/E.

3.Turn Scroll Control to select the delay time from the following options:

-10 sec - resumes after 10 seconds.

-5 sec - resumes after 5 seconds.

0 sec - resumes immediately.

1 sec - waits 1 second for a reply then resumes.

2 sec - waits 2 seconds for a reply then resumes.

3 sec - waits 3 seconds for a reply then resumes.

4 sec - waits 4 seconds for a reply then resumes.

5 sec - waits 5 seconds for a reply then resumes.

4.Press Pgm/E to save and return to previous menu.

53

Page 53
Image 53
Uniden BC125AT owner manual Search Options, Search Delay