Different status messages may display depending on the battery type and scanner status:
USB Message | Batt.. | Meaning | Scanner |
| Type |
| Cond.. |
|
|
|
|
Charging | Scanner is charging. | Off | |
No Battery | None | NO batteries in | Off |
|
| scanner. |
|
Charge | Unit is charged. | Off | |
Complete |
|
|
|
Charge Off | Alk./Ni- | Scanner is not charg- | Off |
| MH | ing (Battery selection |
|
|
| switch is set to Alk.) |
|
Battery Error | Batteries cannot | Off | |
|
| be charged (dead |
|
|
| battery). |
|
|
|
|
|
Illegal Voltage | USB external power | Off | |
|
| is out of range. |
|
See also Setting the Charging Timer, page 35.
If the batteries are good, the scanner charges the batteries. and it operates normally. If the scanner cannot immediately determine if the batteries are good and can be charged, it checks them and displays the battery icon. If the scanner judges the batteries are good, the scanner starts charging and the battery icon disappears. If it cannot regard the batteries as good in 60 seconds, the scanner stops checking and the battery icon blinks.
25
