While monitoring a transmission, the upper line displays the current service bank name and the lower line displays the channel name (if defined) and current frequency with the direction indicator (↑or ↓).

The modulation, Priority mode icon (if Priority is enabled), any CTCSS/DCS received (if enabled), and the Close Call icon (if CC Pri or CC-DND is enabled) will also appear in the display.

Numbers at the bottom of the display show the enabled service search banks. The currently searched bank number flashes in Receive mode.

To store a frequency, press Pgm/E. (see Storing Found Search Frequencies on page 55.)

To temporarily lock out a frequency, press L/O.

To permanently lock out a frequency, press L/O twice quickly.

See also Search Options on page 53 for Delay, CTCSS/DCS settings, and locking out/reviewing/unlocking frequencies.

Custom Search Mode

Custom Search mode lets you program and search 10 custom search ranges. You can search any of these ranges simultaneously and reprogram each custom search range. During custom search, the scanner searches starting with the lowest frequency in the search range you select to the highest frequency in the range.

This feature lets you search through the preset frequency ranges. (See also Programming Custom Search Ranges, page 54). The preset frequency ranges are:

49

Page 49
Image 49
Uniden BC125AT owner manual Custom Search Mode