Uniden BC296D manual Searching

Holding on a Single Talkgroup	26
Locking Out Talkgroups	26
EDACS Blockout	26
Unlocking All Talkgroups	27
EDACS Patch Tracking	27
Searching	28
Holding on an Active Frequency	28
Setting Chain Search	28
Setting Data Skip	28
Skipping Frequencies	29
Storing Found Frequencies	29
Automatically Storing Frequencies	30
Setting Subaudible Tones for Searching	30
Searching for Subaudible Tones	30
Attenuating All Search Ranges	31
Setting DELAY for All Search Ranges	31
Setting a Search Range	31
Searching for Trunk Systems	32
Service Search	33
Service Search Skip	33
Using Weather Search and Weather Alert (SAME)	34
Searching for a Weather Broadcast	34
Using Weather Alert (SAME)	34
Testing the Weather Alert	36
Programming Bank Information	37
Bank Configuration	37
Assigning Bank Names	37
General Programming	38
Deleting Frequencies from Channels	38
Transferring Channel Information	38
Entering Alpha Information	38
General Programming Tips	38
Programming Conventional Channels	40
1. Select a Channel to Program	40
2. Enter the Frequency	40
3. Assigning a Text Tag	41
Setting the Delay	41
Setting the Subaudible Tone Option	41
Setting Beep Alert	42
Setting the Attenuator	42
Changing the Frequency Step	43
Setting the Modulation Mode	43
Setting Priority Channels	44
Programming Trunked Systems	45
Setting Trunking Delay	46
Using I-Call (Motorola and EDACS only)	46
Turning I-Call On and Off for ID Search	46
Turning I-Call On for ID Scan	47
Setting Priority Talkgroups (Motorola and EDACS only)	47
Multi-Track	47
Multi-Track Operational Details	48
Programming Motorola Systems	49
Using Control Channel Programming	49
Programming Type 2/Digital 800 and 900 MHz Systems	50
Programming Type2/Digital VHF and UHF Systems	50
Programming Type I and IIi Hybrid Systems	51
Toggling the Status Bit	52