Uniden BCD996T Holding On a System, Holding On a Channel, Quickly Storing an ID During ID Search

UB335ZH.book Page 49 Friday, March 17, 2006 4:35 PM

To toggle between ID Scan and ID Search, press then press [SCAN/SEARCH] while the scanner is scanning the system.

If the scanner does not scan the system long enough for you to easily do this, press and rotate the Scroll Control to select the changed system. Then, press [SCAN/SEARCH] within 2 seconds.

Holding On a System

To temporarily hold on a system, tap the Scroll Control . To hold on a different system, tap the Scroll Control then rotate the control to select the system. Normal scanning resumes 2 seconds after your last selection.

To permanently hold on a site or system, press and hold the Scroll Control for 2 seconds. flashes in the display’s upper left corner. The scanner continues to scan only the current system. To hold on a different site or system, rotate the Scroll Control to select the new site or system then press [EYES].

Holding On a Channel

To hold on a channel, press [HOLD/RESUME] while the channel is active. To select a different channel, turn the Scroll Control. If you scroll past the beginning or end of the current system, the scanner selects channels in the previous or next system. To resume scanning, press [SCAN/SEARCH].

Quickly Storing an ID During ID Search

To quickly store an active talk group ID during ID search, press [EYES]. You see:

Quick TGID Save?

To save the ID into a channel, press [EYES]. Otherwise, press [.No]. If you press [EYES], the scanner stores the ID into a channel group called Qck Save Grp in the current system.

Quick-Storing Channels or Talk Group ID’s (TGID)

1.Hold on an existing channel in any system.

2.Enter the frequency or talk group ID you want to store (press twice to enter hyphens in talk group ID’s).

3.To quick-store the channel or talk group ID, press [EYES]. Otherwise, press [.No].

Operation

49