Uniden BCD996T manual Displaying Scanner Information, Initializing the Scanner’s Memory

UB335ZH.book Page 59 Friday, March 17, 2006 4:35 PM

your PC (default 115000 bps) and the back port to the speed used to communicate with an attached GPS (default 4800 bps). Note that the back port is male. You may need a gender changer and a null modem adapter to use a typical DB9 serial cable from the rear port.

For Serial Port Speed (Baud Rate), you may select from

4800 bps

9600 bps

19200 bps

38400 bps

57600 bps

115200 bps

OFF

Displaying Scanner Information

Viewing Memory Used

[MENU] Settings

See Scanner Info

% Memory Used

The scanner displays the percent of memory that is used and the number and the percent of systems, sites and channels that are created.

Press any key to return to the previous menu, then press any key to exit the menu.

Viewing the Firmware Version and Electronic Serial Number

[MENU] Settings

See Scanner Info

Firmware Version

Press any key to return to the previous menu, then press any key.

Initializing the Scanner’s Memory

Warning: This clears data you have entered. You cannot restore user programmed data that has been deleted. You can, at a last step, restore only the original factory data.

1. To initialize the scanner’s memory, turn off the scanner.

Programming General Settings

59