Manuals / Uniden / Computer Equipment / Scanner

Uniden BCD996T manual Setting Channel Attenuation, Setting Channel Priority, Set Priority

Models: BCD996T

1 141
Download 141 pages 436 b
Page 89
Image 89

UB335ZH.book Page 89 Friday, March 17, 2006 4:35 PM

WFM (Broadcast) — the scanner uses FM Broadcast for the channel.

This setting controls the modulation method used for the channel. In most cases, if you leave this set to Auto, the scanner automatically selects the correct modulation type for the channel you are programming.

Setting Channel Attenuation

C

[MENU] Program System

 

 

 

 

 

Select a conventional system

 

 

 

Edit Group (existing site)

 

Select a channel group

 

Edit Channel

 

Select a channel

 

Set Attenuator

 

This setting controls whether the scanner attenuates signals on this channel. Select your setting, then press .

On — the channel is attenuated by about 20 dB.

Off — the channel is not attenuated. The default setting is Off.

You can also toggle this setting by holding on the channel and pressing then [7] within 2 seconds.

Setting Channel Priority

C

[MENU] Program System

 

Select a conventional system

 

Edit Group

 

Select a channel group

 

Edit Channel

 

Select the channel

 

Set Priority

 

This setting controls whether the scanner treats the channel as a priority channel while scanning. Select On or Off, then press .

On — when you turn on the Priority feature, the channel will be scanned every 2 seconds.

Off — the channel will not be treated with priority. The default setting is Off.

Programming Your Scanner

89

Page 88 Page 90
Page 89
Image 89
Uniden BCD996T manual Setting Channel Attenuation, Setting Channel Priority, Set Priority
Page 88 Page 90