Uniden BCD996T manual Setting the System Hold Time, Setting ID Scan/ID Search, Setting Data Skip

UB335ZH.book Page 70 Friday, March 17, 2006 4:35 PM

Setting the System Hold Time C

[MENU] Program System

Select a conventional system

Edit Sys Option

Set Hold Time

Set how long the scanner will remain scanning on this system before moving to the next system (up to 255 seconds). Note that the scanner will scan all unlocked channels at least one time, regardless of the system hold time setting.

Setting ID Scan/ID Search	MEL
[MENU] Program System
Select a system
Edit Sys Option
ID Scan/Search

Sets whether the scanner only stops on talk groups you have programmed in (ID Scan) or whether the scanner stops on any unlocked channel (ID Search).

Setting Channel Delay Time	MELCS
[MENU] Program System
Select a system
Edit Sys Option
Set Delay Time

This setting controls how many seconds the scanner waits after a transmission ends before resuming scanning. Enter a value from [1] to [5] or Off, then press .

Notes:

•The default setting is 2 seconds for each system.

•This setting applies to all channels within the system.

Setting Data Skip	C
[MENU] Program System
Select a Conventional system
Edit Sys Option
Set Data Skip

70